Home Hand Tools

• 1/2″ Drive Impact Extension with Ball Retainer – 10″
• Black coating provides rust prevention
• Ball retaining
• Improved access
• Made in the U.S.A

Product Description
Corrosive resistant and laser engraved every 120?

Made in the USA

Lifetime Warranty

… More >>

SK Tools Model SKT-46172 1/2″ Drive Impact Extension with Ball Retainer – 10″

• Impact Adapter 1/2″F-3/4″M with Ball Retainer
• Black coating provides rust prevention
• Ball retaining
• Improved access
• Made in the U.S.A

Product Description
Improved Coating The black coating retains more rust preventative compound than black oxide…. More >>

SK Tools Model SKT-46186 Impact Adapter 1/2″F-3/4″M with Ball Retainer

• 1/2″ Drive Impact Extension with Ball Retainer 3″
• Black coating provides rust prevention
• Ball retaining
• Improved access
• Made in the U.S.A

Product Description
1/2 In Drive Impact Extension w/ Ball Retainer – 3 In Specifications: Diameter – 1.00″ Overall Length – 3.00″ Caution: Do not use pipes or other extensions to increase leverage on the ratchet or flex bar…. More >>

SK Tools Model SKT-46170 1/2″ Drive Impact Extension with Ball Retainer 3″

• 3/4″ Drive Impact Universal Joint with Ball Retainer
• Corrosive resistant
• Improved access
• Ball retainer for ease of use
• Made in the U.S.A.

Product Description
Item #: SKT84690. Made in the U.S.A. Sockets with SureGrip® hex design – the patented SureGrip® hex design drives the side of the fastener, not the corner. This not only provides increased strength, but also avoids the rounding of rusted or damaged fasteners, which can occur when using a sharp cornered hex tool.
Description: 3/4″ drive
Diameter: 1.78″
Length: 4.21″
Customers also search for: Tools and Storage\Hand Tools\Sockets, Ratchets, Adaptors and Extensions\Sockets Discount 3/4″ Drive Impact Universal Joint w/Ring & Pin, Buy 3/4″ Drive Impact Universal Joint w/Ring & Pin, Wholesale 3/4″ Drive Impact Universal Joint w/Ring & Pin, 025141846904, ToolWeb, Sockets… More >>

SK Tools Model SKT-84690 3/4″ Drive Impact Universal Joint with Ball Retainer

• Dead-blow, steel-face head is made of tempered alloy steel
• Crowned faces provide greater accuracy
• Dead-blow function uses steel shot to eliminate bounce back
• Steel reinforced handle provides added strength and safety, resists breaking on overstrike
• Limited Lifetime Warranty

Product Description
Ball-Peen-Hammers – Ball Pein Hammer Compo-Cast« û 8 Oz. – 1… More >>

Stanley 54-508 8 oz Compo-Cast Ball Pein Hammer

• Angle entry up to 25 Degrees on sizes .050, 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8, 7/16 and 1/2-Inch
• The original Balldriver L-Wrenches save time in hard to reach and blind locations
• Tools are Made in the USA with Bondhus proprietary Protanium steel and are up to 20 percent stronger than competitor tools
• ProGuard Finish is 5 times more effective than the next leading brand in preventing rust, protecting your investment over time
• Lifetime warranty

Product Description
The Bondhus 15 piece long arm balldriver hex key set contains all the sizes normally sold in their popular 13 piece sets, but also includes the 7/16″ and the 1/2″ hex wrenches also. Sizes included are:
.050″
1/16″
5/64″
3/32″
7/64″
1/8″
9/64″
5/32″
3/16″
7/32″
1/4″
5/16″
3/8″
7/16″
1/2″… More >>

Bondhus 10935 0.050 – 1/2-Inch Ball End L-Wrenches in Vinyl Pouch, Set of 15

• Spring steel compression ring
• Securely grips screw head
• 1/8 -1/4 and 3 – 8mm screw holding
• Hardened crm-72 tool steel
• Guaranteed quality made by Wiha

Product Description
Wiha 66990 nine piece MagicRing screw holding long metric ball end hex metric L-key set in ProStar holder. Includes metric sizes 1.5, 2.0, 2.5, 3.0, 4.0, 5.0, 6.0, 8.0, 10. Uses spring steel retaining rings to hold screws, hard chromed. The 1.5, 2.0, 2.5 are on standard ball ends…. More >>

Wiha 66990 MagicRing Ball End Hex Key Set, Long Metric In Holder, 9 Piece

• Quality Red Hickory handle.
• Ground, black head with polished poles and peins.
• Permabond construction between head and handle.
• Minimal impact shock
• 24 OZ

Product Description
Cooper Hand Tools, a division of Cooper Industries, Inc., manufactures and markets many well-known brands of hand tools, chain, and electronic soldering products, including Campbell chain, Crescent brand wrenches and pliers, Lufkin measuring tools, Nicholson files and saws, Plumb hammers, H.K. Porter bolt cutters, Weller soldering products, and Wiss snips. Headquartered in Apex, North Carolina, Cooper Hand Tools has manufacturing facilities in six domestic and seven international locations, and has approximately 4,000 employees worldwide…. More >>

Plumb Hickory Ball Pein Hammer – 24 ounce

• Heat-treated, high-carbon steel head for strength and durability
• Rim-tempered process around the striking face minimizes chipping from off-center strikes
• Patented head-to-handle assembly for a permanent fit
• Molded jacket over graphite handle means maximum overstrike protection. Cushioned grip, molded jacket is designed to absorb shock
• Limited Lifetime Warranty

Product Description
Heat-treated, high-carbon steel head for strength and durability Rim-tempered process around the striking face minimizes chipping from off-center strikes Patented head-to-handle assembly for a permanent fit Molded jacket over graphite handle means maximum overstrike protection Cushioned grip, molded jacket is designed to absorb shock Ergonomically designed grip is contoured for working comfort while the ribbed channels allows air to ventilate and cool hand, allows moisture to escape Head Weight = 8 oz Head Handle Grip Overall Length = 13 in Head Material = High Carbon Steel Handle Material = Graphite Type = Ball Pein Hammer Quantity = 4 per box Exceeds ANSI safety specifications… More >>

Stanley 54-708 8 oz Jacketed Graphite Ball Pein Hammer

• High-carbon, steel forged head, hardened and tempered
• Rim-tempered face minimizes chipping, assures greater safety
• Select clear lacquered hickory handle
• Polished face and pein
• Limited Lifetime Warranty

Product Description
Ball Pein Cross Pein – Hammers & Mallets Tool Type: Ball Pein Hammer Head Weight (oz.): 32 Head Weight: 2 Overall Length: 15-7/8 Handle Material: Hickory… More >>

Stanley 54-032 32 oz Wood Ball Pein Hammer