Home Hand Tools

• 3-1/2-inch jaw width with 3-inch maximum opening capacity
• Swivels a minimum of 270 degrees on square four-hole base
• Sturdy steel jaw faces, forming horn and permanent pipe jaws
• Casting has orange baked-enamel finish, all hardware plated-steel

Product Description
Adjustable Clamp 23530 3-1/2″ Light-Duty Pony Bench Vise With Swivel BaseThe Adjustable Clamp Company was incorporated in 1903, by Adele V Holman, to manufacture genuine Jorgensen Handscrews. Today 5 generations later great-great-grandson Douglas Holman is President of the company. Throughout the years each Holman has put his or her mark on the company.Adjustable Clamp 23530 3-1/2″ Light-Duty Pony Bench Vise With Swivel Base Features:; Intended for light-duty home, shop, and professional use; Exhibits rugged strength usually found in more expensive vises Lock-nuts allow the vise to swivel a minimum of 270?? on its base; Grey iron castings with orange baked-enamel finish; Square four-hole swivel bases; Sturdy steel serrated jaw faces… More >>

Adjustable Clamp 23530 Pony Light-Duty Bench Vise with Swivel Base

• Corrosive resistant and laser engraved every 120
• Extra recess depth, 30 degree flex angle and smooth collar design
• SureGrip® hex design drives the side of the fastener, not the corner
• Made in the U.S.A
• Lifetime Warranty

Product Description
Features and Benefits:Contains: 10mm – 19mm socketsLaser etched high visibilityAll sockets are laser engraved with extra-large markings for improved readabilityMarked on three sides for easy visibilityEach socket is specially coated with rust-preventative oil. This procedure ensures that every tool will deliver exceptional, long-lasting performance.Packaged in a molded plastic case WE CANNOT SHIP THIS ITEM TO APO ADDRESSES…. More >>

S K Hand Tools 10 Pc. 3/8″ Dr. Metric 12 Pt Swivel Impact Socket Set

• Tough and reliable 12-piece 1/4-inch drive 6-point swivel metric high visibility impact socket set
• SureGrip hex design drives the side of the fastener, not the corner
• Extra recess depth and a 30-degree flex angle allow for improved access
• Smooth collar design protects the user’s hand
• Made in the U.S.A.

Product Description
12 piece set is 100% made in the U.S.A. featuring SK’s patented SureGrip hex design which drives the side of the hex not the corner. Extra recess depth and a 30 degree flex angle allow for improved access. SK’s smooth collar design protects the user’Amazon.com Product Description
The SK Hand Tools 12-Piece 1/4-Inch Drive 6 Point Swivel Metric High Visibility Impact Socket Set features SK’s high-visibility technology. The sockets are coated with a rust-preventative compound, which makes them exceptionally resistant to corrosive factors, making this socket set an ideal choice for professional-grade use. For easy reference, the sockets are laser engraved with extra-large markings for improved readability. The sockets also come complete with SK’s SureGrip hex design, which drives the side of the hex, not the corner. This not only provides increased strength, but also avoids the rounding of rusted or damaged fasteners, which can occur when using… More >>

SK Hand Tools 32350 12-Piece 1/4-Inch Drive 6 Point Swivel Metric High Visibility Impact Socket Set

• Fifteen 6-point, swivel metric impact sockets with 3/8-inch drive
• SureGrip hex design drives the side of the fastener, not the corner; 30-degree flex angle improves access
• Rust-preventative coating resists corrosion; laser engraved every 120 degrees with large markings
• Packaged in a convenient plastic tray; smooth collar design protects your hand
• Sockets measure 8mm through 22 mm

Product Description
15 piece set is 100% made in the U.S.A. featuring SK’s patented SureGrip hex design which drives the side of the hex not the corner. Extra recess depth and a 30 degree flex angle allow for improved access. SK’s smooth collar design protects the user’Amazon.com Product Description
The SK Hand Tools 15-Piece 3/8-Inch Drive 6 Point Swivel Metric High Visibility Impact Socket Set features the SK’s High Visibility technology. Each socket is laser engraved every 120 degrees with extra-large markings for quick-and-easy reference. Additionally, they are coated with a rust-preventative compound, which makes them exceptionally resistant to corrosive factors for long-lasting durability. The SK’s SureGrip hex design drives the side of the hex, rather than the corner to increase strength and avoid the rounding of rusted or damaged fasteners. For added safety, their smooth collar protects your hand by preventing the pin from coming loose while working. Th… More >>

SK Hand Tools 33350 15-Piece 3/8-Inch Drive 6 Point Swivel Metric High Visibility Impact Socket Set

• Head swivels 360 degrees which allows user to access tight quarters while maintaining comfort
• Cuts 7/32-inch strip which continuously curls out of the cutting area providing consistent and accurate cuts
• Cordless tool is ready to go any work conditions
• Strokes per minute: 0-2,300 spm
• Minimum cutting radius: 5.5 inches

Product Description
Brand new DeWalt 18 Gauge Cordless Swivel Head Shear – The DeWalt DC490B includes: DeWalt 18V Cordless 18 Gauge Swivel Head Shear (Bare Tool), Blade wrench, (Batteries and charger sold separately)… More >>

Bare-Tool DEWALT DC490B 18-Volt Cordless 18 Gauge Swivel Head Shear

• Five 6-point, swivel fractional impact sockets
• SureGrip hex design drives the side of the fastener, not the corner; 30-degree flex angle improves access
• Rust-preventative coating resists corrosion; laser engraved every 120 degrees with large markings
• Smooth collar design protects your hand while in use
• Sockets measure 1-inch, 1-1/16-inch, 1-1/8-inch, 1-3/16-inch, and 1-1/4-inch

Product Description
1/2 In Drive 6 Pt Swivel Fractional Impact Socket Set – 5 Piece – Larger Sizes The patented SureGrip® hex design drives the side of the fastener, not the corner. This not only provides increased strength, but also avoids the rounding of rusted or damaged fasteners, which can occur when using a sharp cornered hex tool. These sockets feature extra recess depth to allow for use where threaded fasteners protrude above the nut or where the fastener is domed. The 30deg flex angle on these sockets allow the user to get at hard to reach fasteners. The socket can be positioned to the desired angle because of the heavy-duty spring. 5 Piece Set Includes: 1″ Socket 1-1/16″ Socket 1-1/8″ Socket 1-3/16″ Socket 1-1/4″ Socket Packaged in a molded plastic case.Amazon.com Product Description
The SK Hand Tools 5-Piece 2/1-Inch Drive 6 Point Swivel Fractional Impact Socket Set features the SK’s High Visibility technology. Each socket … More >>

SK Hand Tools 34302 5-Piece 1/2-Inch Drive 6 Point Swivel Fractional Impact Socket Set

• Five 6-point, swivel fractional impact sockets
• SureGrip hex design drives the side of the fastener, not the corner; 30-degree flex angle improves access
• Rust-preventative coating resists corrosion; laser engraved every 120 degrees with large markings
• Packaged in a molded plastic case; smooth collar design protects your hand
• Sockets measure 20mm through 24 mm

Product Description
5 piece set is 100% made in the U.S.A. featuring SK’s patented SureGrip hex design which drives the side of the hex not the corner. Extra recess depth and a 30 degree flex angle allow for improved access. SK’s smooth collar design protects the user’sAmazon.com Product Description
The SK Hand Tools 5-Piece 1/2-Inch Drive 6 Point Swivel Metric Impact Socket Set features the SK’s High Visibility technology. Each socket is laser engraved every 120 degrees with extra-large markings for quick-and-easy reference. Additionally, they are coated with a rust-preventative compound, which makes them exceptionally resistant to corrosive factors for long-lasting durability. The SK’s SureGrip hex design drives the side of the hex, rather than the corner to increase strength and avoid the rounding of rusted or damaged fasteners. For added safety, the smooth collar design protects your hand by preventing the pin from coming loose while working. A 30-degree fl… More >>

SK Hand Tools 34352 5-Piece 1/2-Inch Drive 6 Point Swivel Metric Impact Socket Set

• Eight 6-point, swivel fractional impact sockets with 1/2-inch drive
• SureGrip hex design drives the side of the fastener, not the corner; 30-degree flex angle improves access
• Rust-preventative coating resists corrosion; laser engraved every 120 degrees with large markings
• Packaged in a convenient molded plastic case
• Sockets measure 1/2-inch, 9/16-inch, 5/8-inch, 11/16-inch, 3/4-inch, 13/16-inch, 7/8-inch, and 15/16-inch

Product Description
8 Piece Swivel Impact Socket Set – 1/2″ Drive SAE 6 Point The patented SureGrip hex design drives the side of the fastener, not the corner. This not only provides increased strength, but also avoids the rounding of rusted or damaged fasteners, which can occur when using a sharp cornered hex tool. The S-K sockets feature extra recess depth to allow for use where threaded fasteners protrude above the nut or where the fastener is domed. The 30 degree flex angle on the S-K sockets allows the user to get at hard to reach fasteners. The socket can be positioned to the desired angle because of the heavy-duty spring. Contains: 1/2″, 9/16″, 5/8″, 11/16″, 3/4″, 13/16″, 7/8″ and 15/16″ Sockets. Packaged in a molded plastic case.Amazon.com Product Description
The SK Hand Tools 8-Piece 1/2-Inch Drive 6 Point Swivel Impact Set features the SK’s High Visibility technology. Each socket is laser engraved every 120 degrees with extra-large markings for quick… More >>

SK Hand Tools 34301 8-Piece 1/2-Inch Drive 6 Point Swivel Fractional Impact Socket Set